3 in 1 RC Lipo-Battery Voltage Balancer & Discharger

3 in 1 Lipo-Battery Checker.

The 3 in 1 Lipo battery balance/discharger is designed for Li-Po and Li-Fe batteries. It can measure battery voltage precisely and balance each cells’ voltage of a battery pack or discharge batteries in preparation for storage. You can observe each cells’ voltage in the battery pack individually. This helps identify abnormal or failing cells during the charging or discharging process. The balance function can be executed before or after the battery has been charged. It also can be done during the battery charging process, helping to ensure that the battery pack remains in excellent condition.

Specifications

• Compatible battery type and cell count: Li-Polymer / Li-Fe 2-6 cell (7.4V - 22.2V)
• Balance voltage setting range (lower limit): 2.0V - 3.9V
• Receiver battery voltage testing: 1.2V - 8.5V DC (Not limited to battery type, but requires external power 7.4 - 11.1V Li-Polymer / Li-Fe (use JST balance connector)
• Discharge voltage setting range (lower limit): 3.0V - 4.2V
• Futaba / JST connector socket for rx packs
• JST-XH balance sockets for Lipo / Li-Fe.
• Outside dimensions: 93.5 x 60 x 17mm